当前位置:首页 - 常见问题解答 >

线材成型设备怎么判断故障的所在?

来源: http://www.diannaothj.com    时间:2019-03-21 17:14:25 作者:山东银丰弹簧机设备

1、先外部后内部
1. External first and then internal
线材成型设备是零部件较多的大型设备,修补人员应先由外向内逐一停止排查,尽量避免随意地启动、拆开,否则会扩展缺点,使设备精度降落;
Wire forming equipment is a large-scale equipment with many spare parts. The repairman should stop checking one by one from outside to inside, and try to avoid starting and disassembling at will, otherwise the shortcomings will be expanded and the accuracy of the equipment will fall.
2、先静后动
2. First static then dynamic
先在设备断电的情况下,经过理解、调查、检验、分析,肯定为非毁坏性缺点后,方可给设备通电,在运转状况下,停止动态调查,关于毁坏性缺点,必 需要先扫除风险后,方可给设备通电;
First, in the case of power failure of equipment, after understanding, investigation, inspection and analysis, it must be non-destructive shortcomings before the equipment can be energized. In the operation situation, the dynamic investigation should be stopped. As for the destructive shortcomings, the risk must be eliminated before the equipment can be energized.
山东银丰线材成型机
3、先机械后电气
3. Machinery before electricity
普通来说,机械缺点较易觉察,而数控体系缺点确实诊则难度会比拟大些。在问题检修之前,首先先预先排查机械的问题,这样常常能够到达事半功倍的成效;
Generally speaking, mechanical shortcomings are easier to detect, while the diagnosis of CNC system shortcomings is more difficult. Before problem overhaul, we should first check the mechanical problems in advance, which can often achieve twice the result with half the effort.
4、先简单后杂乱
4. Simplicity and disorder
当呈现多种问题相互交织遮掩,一进无从下手时,应先处置简单的问题,后处置难度较大的问题,常常简单的问题处置后,难度大的问题也就迎刃而解了。
When a variety of problems are intertwined and concealed, when there is no way to start, we should deal with the simple problems first, then the more difficult ones. Often, after the simple problems are dealt with, the more difficult ones will be solved.

上一篇:识别弹簧床垫的质量优劣的方法
下一篇:无凸轮弹簧机会是下一个发展的趋势吗?
联系我们