当前位置:首页 - 新闻动态 > 公司公告 >

让自动弹簧机提高工作效率需要怎么操作?

来源: http://www.diannaothj.com    时间:2017-04-10 17:50:27 作者:山东银丰弹簧机设备

开启自动弹簧机的时候要按照规定的步骤进行操作,生产之前要做好检查调动所有的紧固件,避免在生产的过程中出现松动、掉落、移位等现象,导致自动弹簧机损坏。
When starting the automatic spring machine to operate in accordance with the provisions of the procedures to do the inspection to mobilize all fasteners before production, to avoid loosening and falling and shift phenomenon in the production process, resulting in damage to the automatic spring machine.
自动弹簧机在长时间停机的时候,尽量把送轮松开,如果长时间不松开,会导致轴承磨损,送线轮也会变形,后会导致自动弹簧机的密度不稳定。如果带线压紧时间太长,有可能会使线径变形。
Automatic spring machine in a long period of time to stop, as far as possible to release the wheel, if not for a long time to loose, will lead to bearing wear, the transmission line will be deformed, and will eventually lead to the density of automatic spring machine is not stable. If the thread is pressed for too long, it is possible to deform the wire diameter.
经验不足的操作者在调试自动弹簧机的时候,好有老师傅在场知道,可以避免发生不必要的事故。
Inexperienced operators in the commissioning of automatic spring machine, it is best to have the presence of the master know, can avoid unnecessary accidents.
弹簧机
自动弹簧机在运行的过程中,不可以用手去接触弹簧机的面板。
In the process of running, the automatic spring machine can not touch the panel of the spring machine by hand.
弹簧机产品的掉落要控制好方向,避免卡住刀座。
Spring machine products fall to control the direction, to avoid sticking knife seat.
弹簧机产品如果出现故障,要立刻解决好故障之后再进行工作。要交给有经验的人进行维修、检查,不可以让没有专业技术的人员进行拆卸,避免再次发生损坏。
If there is a failure of the spring machine, it is necessary to solve the problem immediately after the work. To be handed over to an experienced person for maintenance, inspection, can not be without professional and technical personnel to remove, to avoid damage again.
以上就是我们产品的相关介绍,本文来源电脑弹簧机,更多精彩内容请点击: http://www.diannaothj.com
The above is the introduction of our products, this paper source computer spring machine, more exciting content, please click: http://www.diannaothj.com

上一篇:无凸轮弹簧机的工作及保养的一些方案
下一篇:电脑弹簧机的发展带来的优势特点
联系我们