当前位置:首页 - 新闻动态 > 公司公告 >

对电脑弹簧机开机的操作小妙招

来源: http://www.diannaothj.com    时间:2016-05-12 16:42:37 作者:山东银丰弹簧机设备

1、操作者要注愈保留现场。并向维修人员如实说明事故发生前后的情况,以利于分析问题,查找事故原因。数控弹簧机的使用一定要有专人负贵。严格其他人员随愈动用数控设备。操作完毕后,擦净机床,清理工作场地,断开电抓,并要认真填写工作日志。做好交接工作。消除事故隐患。不得随意更改致控系统内制造厂家设定的参数和操作程序。
1, the operator should pay more to keep the site. And the maintenance personnel to accurately explain the situation before and after the accident, in order to facilitate the analysis of the problem, to find the cause of the accident. The use of CNC spring machine must have someone to take your hand. Strict other personnel with the more use of numerical control equipment. After the operation is completed, clean the machine, clean up the work site, disconnect the electric grab, and to carefully fill in the work log. Do a good job transfer. Eliminate accident hidden trouble. Can not arbitrarily change the control system manufacturers set parameters and operating procedures.
2、在开机前,操作者必须检查机床各部位的润滑、防护装等是否符合要求,确认无误后方可操作。机床通电后。操作者应检查各开关、按钮和按健是否正常、灵活,机床有无异常现象。开机、关机用序,一定要按照机床说明书的规定操作。
2, before starting the machine, the operator must check the lubrication of various parts of the machine, and the protective equipment is in line with the requirements, to confirm the correct operation of the rear. After the machine is powered on. The operator should check the switch, button and press the health is normal, flexible, there is no abnormal phenomenon of the machine tool. Boot, shutdown with the order, must be in accordance with the provisions of the machine instructions.
3、做实验或实践须在实践教师指导下进行,未经指导师傅的同意,不要擅自开机。在开机前,操作者必须检查机床各部位的设备的操作者必须按规定穿戴好劳动保护用品,不穿拖鞋、凉鞋、高跟鞋上岗
3, do the experiment or practice must be under the guidance of teachers, without the guidance of the teacher's consent, do not start without authorization. Before starting, the operator must check the machine parts of the equipment operator must wear good labor protection supplies, do not wear slippers, sandals, high heels posts

上一篇:数控弹簧机的日常三大维护系统
下一篇:对弹簧机在装配中的精度原则分析
联系我们