当前位置:首页 - 新闻动态 > 公司公告 >

扭簧机空载试运转步骤

来源: http://www.diannaothj.com    时间:2016-05-16 16:45:52 作者:山东银丰弹簧机设备

1、首先启动扭簧机的转动,检查各部件是否正常。电压是否稳定,检查完毕转动Z轴之后检查Z轴转动是否平稳,无扭动等现象。出厂前无负载运转必须空转4-8小时。1
1, first start the rotation of the torsion spring machine, check whether the normal parts. Voltage is stable, check after the rotation of the Z axis check Z axis rotation is stable, no twisting and other phenomena. Before running without load must be idle for 4-8 hours.
2、检查扭簧机是否有接地线,防止漏电点情况发生,以免造成不必要的发生。
2, check whether the torsion spring machine grounding, prevent leakage point of the situation, so as not to cause unnecessary.
3、把控制器调为手动操作,反复使用Y轴运动,看Y轴运行是否平稳和轻松。
3, the controller is transferred to the manual operation, repeated use of the Y axis motion, see the Y axis operation is smooth and easy.
4、在扭簧机空运转试验过程中检查下列项目:
4. Check the following items during the operation of the torsion spring machine:
1):传动齿轮及轴承等各润滑点的润滑充分,各密封部位密封良好。
1): transmission gear and bearings and other lubrication points of the lubrication, the sealing parts of the good seal.
2):运转中不得有较大的振动和周期性噪声。
2: the operation must not have a larger vibration and periodic noise.
本文来自:弹簧机更多精彩内容请点击我们的官方网站:http://www.diannaothj.com 我们将倾情为您解答。
This article from: spring machine more exciting content please click on our official website: http://www.diannaothj.com we will give you the situation to answer. 

上一篇:对弹簧机在装配中的精度原则分析
下一篇:数控弹簧机的装机流程
联系我们