当前位置:首页 - 新闻动态 > 公司公告 >

无凸轮电脑弹簧机的安装流程

来源: http://www.diannaothj.com    时间:2016-06-02 15:59:36 作者:山东银丰弹簧机设备

1、确认电源已关闭。
1, confirmed that the power has been closed.
2、擦拭机台上机件。
2, wiping machine parts.
3、装上刀架,视工作状态调整刀架至需要位置:用手沿滑轨轻推刀架向轴心,将刀架用两颗刀架固定螺丝固定在进刀之位置。
3, turret, depending on the work status adjustment tool to position: by hand along the slide rail nudge turret to the axis, the turret with two single turret screw fixed in the position of the feed.
注意事项:本机基本配置中刀架如下:左活动刀架3套,右活动刀架2套;左移动刀架1套,右移动刀架2套;移动刀架分左、中、右各1套。用户根据加工弹簧的需要,选择使用。
Note: the basic configuration of the machine tool is as follows: left 3 sets of activities, right activities of the 2 sets; left 1 sets of moving knife, 2 sets of right moving knife; moving knife left, middle and right of the 1 sets. Users according to the needs of the processing of the spring, choose to use.
4、装上附件装置,比如撞块架、拉簧钩等。
4, equipped with an accessory device, such as block frame, spring hook etc..
无凸轮电脑弹簧机采用10组以上伺服电机控制作业,利用独特的无摇臂设计,通过八个伺服电机独立控制八个爪臂工位,外加上送线系统、转芯系统、转线系统和卷曲系统等都是由独立的电机驱动,调试机器方面更加快速方便。
No CAM computer spring machine adopts more than 10 groups of servo motor control operation, with no unique arm design. Through eight servo motor control eight claw arm position, plus send line system, core system, transfer system and curl system is driven by an independent motor, machine debugging more convenient and fast.

上一篇:复式压缩机的弹簧固定结构原理
下一篇:六轴电脑压簧机和两轴电脑压簧机的区别
联系我们