当前位置:首页 - 新闻动态 > 公司公告 >

造成电脑弹簧机送线架失常的解决方法

来源: http://www.diannaothj.com    时间:2016-08-09 14:18:50 作者:山东银丰弹簧机设备

1。料盘不转动,是因为调速旋钮内部接触不良,需改换调速旋钮;
1. The material disc does not rotate, because the internal contact of the speed regulating knob is bad, and the speed regulating knob is required to be changed;
2。线架断线不报警,是因为马达传动减速机的皮带能否松动不敷紧;
2. Line frame is not alarm, it is because the motor drive speed reducer is not enough to loosen the belt;
3。变频器报警,是因为减速机改动轴与料架托盘上的轴套有螺丝紧固,反省一切螺丝能否松动;
3. Inverter alarm, because gear change shaft and sleeve tray rack material with the fastening screw and reflect all screws can loosen;
4。电压过高线架失灵,是因为反省料盘上的压盖螺丝有没有锁紧。
4. Voltage wire frame failure, because the reflection gland screws on reels have locking.
5。原子开关损坏,拉杆没反应?需检查电压是否过高,
5. The atomic switch is damaged, the pull rod does not react, need to check whether the voltage is too high,
对于弹簧长度调节来讲,它主要是由内推和外节距这两种类型。内推是需要调节里面推的直杆从带动顶针将弹簧推开,但是外节距则是由凸轮带动节距刀和顶杆弹簧从而将弹簧给打开。
For the spring length adjustment is concerned, it is mainly from the inner and outer segments of the two types of distance. Push is needed to adjust inside push the straight rod from the thimble is driven to push the spring, but outside the pitch is by a cam driven section from knife and push rod spring and spring to open.
本文由电脑弹簧机提供帮助,更多的相关内容请点击: http://www.diannaothj.com 我们将详情为您解答.欢迎您的光临!
This article by the computer spring machine to provide the help, more related content please click: http://www.diannaothj.com we will be the details for you to answer!

上一篇:目前电脑弹簧应用的三大领域
下一篇:关于电脑弹簧机的平衡要求有哪些?
联系我们