当前位置:首页 - 新闻动态 > 公司公告 >

弹簧机械设备调整五项内容

来源: http://www.diannaothj.com    时间:2016-09-13 13:56:11 作者:山东银丰弹簧机设备

  1.弹簧外经的调整:
  1 spring external adjustment:
  主要是来调整外经的机构,只需要调试顶杆往里或是往外,在调整方面比较简单。
  Mainly to adjust the outside of the body, only need to adjust the top rod to the inside or outside, in the adjustment is relatively simple.
  2.送料长度和总圈数的调整:
  2 feeding length and the adjustment of the total number of cycles:
  送料的长度是决定所选用齿轮的齿数,齿轮数多少的控制是需要看弹簧的展开长度。
  The length of feed is determined by the number of gear teeth, the number of gear control is required to see the expansion of the spring length.
  3.自由高度、节距和圈数的调整:
  3 free height, pitch and ring number of adjustment:
弹簧长度调节,包括内推和外节距两种。内推需要调节里面推的直杆,来带动顶针将弹簧推开;外节距是由凸轮带动节距刀和顶杆弹簧,从而将弹簧给打开。
  Spring length adjustment, including two kinds of internal and external. Push straight push rod adjusting inside need, to drive away the outer thimble of the spring; the pitch is driven by a cam push rod spring festival from the knife and, thus to open the spring.
  4.支承圈间并紧力的调整:
  4 the adjustment of the bearing ring and the tight force:
  在卷制压缩弹簧的时候,需要两端的圈并紧,贴紧的长度有特定要求。
  When the compression spring is rolled, the ring is needed at both ends and the length of the compression spring is tight.
  5.切断机构的调整:
  5 adjustment of cutting mechanism:
  对于切断的机构,通常采用的是切刀,由垂直切断的方法来和芯心进行工作。可以使用加大芯轴的尺寸,允许同时起到支承簧圈的作用。
  For cutting off the body, usually using a cutting knife, by the vertical cut method to work with the core. Can be used to increase the size of the core shaft, allowing the same time to play the role of supporting the spring ring.
  本文来自:电脑弹簧机更多精彩内容请点击 http://www.diannaothj.com我们的官方网站我们将倾情为您解答。
  This article from: the computer spring machine more wonderful content please click http://www.diannaothj.com our official website we will give you the situation to solve.


上一篇:电脑弹簧机的两大结构及系统的失控
下一篇:四大原因导致弹簧机屏幕不显示
联系我们