当前位置:首页 - 新闻动态 > 公司公告 >

弹簧机送线架问题解决

来源: http://www.diannaothj.com    时间:2016-11-08 15:47:36 作者:山东银丰弹簧机设备

弹簧机开机时,送线架没工作灯显示,没鸣报时,检查送线架的开关是否处于闭合状态,进电源是否有电,电压是否是规定的电压值,保险管有没被烧毁;
Spring machine, wire feeding shelf no work lights show, not Ming time, check whether the wire frame switch is in the closed state, into a power if there is power, if the voltage is a specified voltage value, the insurance tube has not been burned;
当数控弹簧机送线架处于有电状态,线架不转时,应检查送线架电机是否能运转,卸下皮带试电机,查看变频器有没报警,如果不是,就要及时更换变频器;
When the wire frame in a state has power CNC spring machine, wire frame does not turn, should check whether the motor wire feeding shelf operation, remove the belt motor test, check converter has no alarm, if not, it is necessary to replace the inverter in a timely manner;
当线架没有同步送线功能时,就是自动送线功能,检查线架电路板中的继电器是否烧坏,如果继电器的工作灯一直亮,就需要更换;
When the wire frame without synchronous wire feeding function, is the automatic wire feeding function, check the line frame relay in the circuit board is burnt out, if the work lamp relay has been lit, will need to be replaced;
当微动开关的拉杆拉到底时,线架没有停止运转, 弹簧机的显示频上也没有出现“线架故障”之类的字样,如果有就要检查微动开关盒里的拉杆是否与两头的感应器相接触,如果没有,就要调整为接触,或者是更换感应器。
When the pull rod pull end micro switch, wire frame did not stop, spring machine display frequency did not appear "fault line" and so on, if there is to check whether the micro switch rod box with two sensors in contact, if not, it is necessary to adjust the contact, or replace the sensor.
本文由济南电脑弹簧机友情奉献.更多有关的知识请点击: http://www.diannaothj.com我们将用先进的技术.真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
In this paper, by the Ji'nan computer spring machine friendship devotion. More related knowledge please click: http://www.diannaothj.com we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.

上一篇:数控弹簧机的传动装置保养措施有哪些?
下一篇:卷簧机的故障问题的应对方式
联系我们