当前位置:首页 - 新闻动态 > 公司公告 >

弹簧机的的内部结构包括哪些内容?

来源: http://www.diannaothj.com    时间:2016-12-06 14:26:44 作者:山东银丰弹簧机设备

一、校直机构:校直机构的位置在料架与送料滚轮之间,它由两组校直滚轮组成,校直系统的目的是消除钢丝原有的弯曲变形,经校直后,能挺直的进入成形的机械,以便提高卷簧的精度。
A straightening mechanism: straightening mechanism position between the material frame and the feeding roller, which consists of two sets of roller straightening, straightening system is designed to eliminate the wire bending deformation of the original, by straightening, forming machinery can enter straight, in order to improve the accuracy of coil spring.
二、送料机构:送料机构是靠一对或两对送料轮压紧钢丝,以送料轮的旋转带动钢丝直线前进的装置。采用扇形不完全齿轮传动送料轮轴上的齿轮来完成,上、下滚轮的转速相同,但旋转方向相反。送料轮旋转一周,送料长度就是送料轮的周长,弹簧的展开长度可由送料轮的旋转圈数决定,扇形不完全齿轮的齿数是控制送料轮的旋转圈数(具体参照系数表)。 推广
Two, feeding mechanism: feeding mechanism is to rely on a pair of or two of the feed wheel to press the wire, in order to feed wheel rotation to drive the wire straight ahead of the device. The gear wheel is used to complete the rotation speed of the upper and lower rollers, but the rotation direction is opposite. The feeding wheel rotation, feed length is sent round the perimeter material, spring expansion length can be determined by the number of rotations of the feeding wheel, gear sector incomplete gear is to control the rotation of feed wheel number (specific reference coefficient). Brand promotion三、变径机构:变径机构是指卷绕弹簧时,弹簧外径的控制机构,它是由两个顶杆和驱动顶杆的变径凸轮组成。
Three, reducing mechanism: reducing mechanism refers to the winding of the spring, the outside diameter of the spring control mechanism, which is composed of two diameter variable cam push rod and a push rod drive component.
生产圆柱弹簧时,弹簧走丝不变,调整两个顶杆至相应位置,符合弹簧的外经尺寸,然后固定两个顶杆位置不变。生产变径弹簧时,如中凸、截锥形弹簧、上顶杠前后两个螺栓松开,让顶杆在刀架里来回伸缩,以改变弹簧外经,通过变径凸轮驱动顶杆,达到生产各种变径弹簧的目的。
When the cylinder spring is produced, the spring is constant, the two top rod is adjusted to the corresponding position, and the outside of the spring is in size, and then the position of the two top rod is fixed. The production of adjustable spring, such as convex, truncated cone shaped spring, the top bar before and after the two bolts loosen, let the top rod stretching back and forth in the knife, to change the spring, the push rod through reducing the cam drive, to achieve the purpose of reducing the production of all kinds of spring.
四、节距变更机构:节距变更机构是控制弹簧节距的机构,本机有2种机构:
Four, pitch change mechanism: pitch change mechanism is the mechanism that controls the spring pitch, this machine has 2 kinds of mechanism:
(1)由一把节距刀和变距凸轮组成。变剧凸轮是控制弹簧的有效圈数,节距刀下面螺栓调节弹簧高度;
(1) consist of a pitch cutter and a variable pitch cam. Variable play cam is the effective number of the control spring, and the height of the bolt adjusting spring;
(2)由凸轮传动连杆,使节距刀从机器里面推出,更好的估大节距的弹簧。
(2) the cam drive rod, knife from the envoys launched from inside the machine, a better assessment of large pitch of spring.
关于弹簧机 http://www.diannaothj.com的着色方法就先介绍到这里了,相信大家在实际的工作中会用到相关知识,如果您有这方面的需要,欢迎前来选购。
About the spring machine http://www.diannaothj.com coloring method is introduced here, I believe you will use the relevant knowledge in the actual work, if you have this need, welcome to buy.

上一篇:卷簧机的故障问题的应对方式
下一篇:YLSK-20型号电脑弹簧机的特点
联系我们