当前位置:首页 - 新闻动态 > 公司公告 >

YLSK-20型号电脑弹簧机的特点

来源: http://www.diannaothj.com    时间:2016-12-13 14:49:00 作者:山东银丰弹簧机设备

1、 YLSK-20电脑弹簧机采用台湾电脑控制系统和进口伺服马达。
1, YLSK-20 computer spring machine using the Taiwan computer control system and imported servo motor.
2、 凸轮轴、送线轴、转芯轴、辅助轴(选购配件)、四轴可联运。机械部份共有八组滑座,曲柄和凸轮旋轮轴。凸轮固定在旋轮轴上,可以螺丝调整前后,并用来推动滑座的运动。机械的动作有三种方式:挤压、冲压及成型。
2, camshaft, feeder axis, the rotary mandrel and the auxiliary shaft (optional), four axis transport. The mechanical part consists of eight groups of sliding seat, crank and camshaft. The cam is fixed on the rotary shaft, and can be adjusted before and after the screw, and is used to drive the movement of the sliding seat. There are three ways of mechanical movement: extrusion, stamping and forming.3、 YLSK-20机配置台湾SMC502电脑,电脑系统可记忆1000个工件程序,各轴的位置、送线资料、生产速度、生产数量都显示在屏幕上。程式资料很容易在键盘上设定及改变,调试非常方便快捷。
3, YLSK-20 machine configuration Taiwan SMC502 computer, the computer system can memory 1000 workpiece program, the position of each axis, the line of information, production speed, production quantity is displayed on the screen. Program information is very easy to set and change on the keyboard, debugging is very convenient and quick.
送线系统:
Wire feeding system:
送线系统水平装在机器后面,每2个送线轮为一对,YLSK-20机在线径1.0以下只需装一对钨钢送线轮,1.0以上的装两对白钢送线轮。,线径不同时须装适合至送线轮。电脑控制之送线系统,每一运动单位约为0.01mm,每命令大为99999.99个运动单位。特点:耐磨、噪声极小,与控制系统同步精度高。
The wire feeding system installed in the back of the machine level, each of the 2 wire feeding wheel for a pair of online YLSK-20 size below 1 only a pair of tungsten wire feeding wheel, two pairs of white steel wire feeding wheel installed more than 1. , the wire diameter is not the same to be fitted to the wire feed wheel. A computer controlled delivery system, each of which is about 0.01mm, with a maximum of 99999.99 motion units per command. Features: wear, noise is very small, and control system synchronization precision is high.
 

上一篇: 弹簧机的的内部结构包括哪些内容?
下一篇:数控弹簧机械的清洁技巧
联系我们