当前位置:首页 - 解决方案 >

数控弹簧机怎么会出现蓝屏的情况呢?

来源: http://www.diannaothj.com    时间:2019-05-08 16:39:21 作者:山东银丰弹簧机设备

开机马上按F8不动到高级选项出现在松手,选“近一次的正确配置”回车修复,还不行按F8进入安全模式还原一下系统或重装系统(如果重装也是蓝屏,建议还是检修一下去,如果可以进入安全模式,说明你安装了不合适的东西,将出事前下载的不合适东西全部卸载,或还原系统或重装)。 先软后硬,出现这样的问题是软件冲突、驱动不合适、系统问题引起的,可以在安全模式还原一下系统,还是不行重新安装操作系统,不要安装软件、补丁、驱动等,看看开机还有问题吗?如果没有在逐步的安装驱动、补丁、软件,找出不合适的东西就不要安装了。 在有就是硬件引起的,扣出主板电池放一下电,插拔一下内存、显卡清一下灰,在检查硬盘是否有问题,不行就检修一下去吧。如果用什么方法都开不了机,这是突然关机,造成了磁盘受损引起的,一个是扣出主板电池放一下电,一个是放一段时间在开机试试,还是不可以就修修去吧。
Boot immediately press F8 fixed to the advanced options appear in the let go, choose "latest properly configured" return to repair, also can't press F8 into safe mode or restore the system reshipment system (if reshipment is blue screen, suggest or repair a bottom go to, if can enter the safe mode, you installed the wrong things, all out prior to download something inappropriate uninstall, or restore system or heavy). Soft after hard, such a problem is caused by software conflict, inappropriate driver, system problems, can restore the system in the safe mode, or not reinstall the operating system, do not install software, patches, drivers, and so on, to see the boot problem? If you don't install drivers, patches, and software step by step, don't install anything that isn't appropriate. In have those who cause hardware namely, buckle out motherboard battery puts report, insert and pull out memory, show card clear ash, whether to have a problem in checking hard disk, not line overhaul goes down. If you cannot open the machine in any way, this is a sudden shutdown, resulting in damage to the disk, one is to buckle out the motherboard battery to put the power, one is to put a period of time to try in the boot, or can not repair it.
2)如果总是这样,先软后硬,重新安装操作系统,不要安装软件、补丁、驱动等,看看开机还有问题吗?如果没有在逐步的安装驱动、补丁、软件,找出不合适的东西就不要安装了。
电脑弹簧机
2) if this is always the case, the first soft then hard, re installation of the operating system, do not install software, patches, drivers, etc., to see boot is there a problem? If you don't install drivers, patches, and software step by step, don't install anything that isn't appropriate.
注意:如果还原系统或重装后,安装驱动、补丁、软件等东西时,一定要将影响你这次出事的东西不要在安装上去了,否则就白还原或重装了。
3)硬件方面,如硬盘、内存等是否出现问题,CPU等硬件的温度是否高,如果是硬件问题引起的,建议检修一下去。
Note: if you restore the system or reinstall, install drivers, patches, software and other things, be sure to affect you this accident things do not go up in the installation, or white restore or reinstall.
3) hardware, such as hard disk, memory, whether there is a problem, the temperature of CPU and other hardware is high, if it is caused by hardware problems, it is recommended to repair.

上一篇:电脑弹簧机的弹簧表面油漆处理方法
下一篇:数控弹簧机电镀出现的问题及解决方法
联系我们