当前位置:首页 - 解决方案 >

压簧机的生产步骤离不开哪些流程?

来源: http://www.diannaothj.com    时间:2019-06-20 15:55:26 作者:山东银丰弹簧机设备

1、压簧机操作者必需按规则穿截好劳动维护用品,不穿拖鞋、凉鞋、高跟鞋上岗。操作时不得截手套、国巾及戒指、项链等各类饰物,不得吸烟,不得与别人闲谈,肉体要集中。
1. The spring press operator must wear and cut the labor maintenance articles according to the rules, and not wear slippers, sandals and high-heeled shoes. No gloves, scarves, rings, necklaces and other accessories, no smoking, no chatting with others, and the body should be concentrated.
2、关于压簧机的运用环境。要遨免在运用场所呈现光的直接映照和其他热辐射、太瀚涅或粉尘过多、有腐蚀气体等悄况。
2. About the operating environment of spring press. It is necessary to avoid the direct reflection of light and other thermal radiation, too much dust or corrosive gases.
3、压簧机未装工件前。操作者要空运转一次程序。粉程序能否顺利运转、刀其和央具装置能否合理、有无超程现象。操作者必需在确认工件央紧后才干启动机床。
3. Before the spring press is loaded with the workpiece. Operators should run the program empty once. Whether the powder process can run smoothly, whether the knife and the central fixture device are reasonable, and whether there is over-range phenomenon. The operator must confirm that the workpiece is centrally tight before starting the machine.
4、主轴启动开端切俐之前。操作者一定要关好防护策门,程序正常运转过程中严禁翻开防护策门。
4. Before the spindle starts to cut. Operators must close the protective door, and it is strictly prohibited to open the protective door during the normal operation of the procedure.
5、严禁在车间内熔戏、打闹。操作者必需熟习数控机床运用阐明书等有关材料。如,主要技术今数、传动原理、主要构造、光滑部位及维护颐养等普通学问。
5. It is strictly forbidden to melt and make noises in the workshop. Operators must be familiar with CNC machine tool application instructions and other related materials. For example, the main technology, transmission principle, main structure, smooth parts and maintenance of general knowledge.
电脑弹簧机
6、开机前,操作者必需检查机床各部位的光滑、防护装等能否契合请求,确认无误前方可操作。
6. Before starting the machine, the operator must check whether the smoothness and protective fittings of all parts of the machine meet the requirements and confirm that the machine can be operated correctly.
7、压簧机一切实验或理论须在理论教员指导下停止,未经指导教员同意,不要擅自开机。
7. All experiments or theories of the spring press should be stopped under the guidance of the theoretical instructor. Do not start the spring press without the consent of the instructor.
8、压簧机通电后,操作者应检查各开关、按钮和按健能否正常、灵敏,机床有无异常现象。
8. After the spring press is powered on, the operator should check whether the switches, buttons and press-fits are normal and sensitive, and whether there are abnormal phenomena in the machine tool.
9、严禁工件转动时丈量、触摸工件,压簧机在正常运转时不允许翻开电器柜的门,萦止按动“急停”或“复位”按钮。
9. It is strictly forbidden to measure and touch the workpiece when the workpiece rotates. The spring press is not allowed to open the door of the electrical cabinet when it is in normal operation, and the "emergency stop" or "reset" button is always pressed.
10、压簧机的开机、关机用序,一定要依照机床阐明书的规则操作。
10. The order of starting and shutting down of spring press must be operated according to the rules of machine tool instruction.

上一篇:模具强力压簧机弹簧的设计生产原则
下一篇:弹簧机的使用要求及装配知识
联系我们