当前位置:首页 - 新闻动态 > 企业动态 >

弹簧机电机常见故障的检查

来源: http://www.diannaothj.com    时间:2017-02-10 17:56:20 作者:山东银丰弹簧机设备

1.弹簧机开动时需要检查弹簧机的温度以及震动强度等。
1 spring machine needs to check the temperature and vibration intensity of the spring machine.
2.检查励磁系统,检查滑环和整流子的运行状态。
2 check the excitation system, inspect the running state of the slip ring and the commutator.
3.检查冷却器有没有漏水和结霜等现象。
3 check the cooler have Water Leakage and frosting phenomenon.
接下来就讲述一下弹簧机电机的检测方法
Then tell about the detection method of spring motor
1.听声音:机器正常运转时用耳朵仔细倾听电机尾部发出的声音,好电机的声音纯度都很高,一般的则能听出杂音;
1 listen to the sound: the normal operation of the machine carefully with the ears to listen to the voice of the motor tail, the sound of the motor is very high purity, the general can hear the noise;
2.选购弹簧机时一般都要选订弹簧行业用的成熟电机,这种电机我们一般可以通地标牌辩别出来;
2 when the spring machine to buy the general election of the spring industry with the most mature motor, the motor we can generally do not come out through the signs;
3.参数,电机驱动器的参数对电机的稳定性也是至关重要的,一般电机参数越高,弹簧生产越稳定,电机声音也会比较大;相反,电机声音越平和说明稳定性也越差,所以我们在选购弹簧机时不要一味的求无噪音,像这方面参数一般我们追求三者之间平衡到佳值,切勿一味追求高速故意把参数调高,虽然弹簧机行业是可取的,它是有界限的,只要不引起机器共震就行。
3 parameters, parameters of motor drive motor on the stability is also very important, general motor parameters is higher, the more stable the spring production, motor sound will be larger; on the contrary, the motor sound and more peaceful that stability is worse, so we do not want to buy in the spring machine blindly seek no noise, like between the parameters we seek the balance of the three to the optimal value, do not blindly pursue high speed deliberately parameters increase, although the spring machine industry is desirable, it is bounded, as long as it does not cause a total shock machine.

上一篇:弹簧机制作弹簧的冷成形原理
下一篇:弹簧机的深冷技术的把控处理
联系我们