当前位置:首页 - 新闻动态 > 企业动态 >

弹簧机送线架故障的出现的故障解决

来源: http://www.diannaothj.com    时间:2017-03-28 15:29:16 作者:山东银丰弹簧机设备

弹簧机开机时,送线架没工作灯显示,没鸣报时,检查送线架的开关是否处于闭合状态,进电源是否有电,电压是否是规定的电压值,保险管有没被烧毁;
Spring machine, wire feeding shelf no work lights show, not Ming time, check whether the wire frame switch is in the closed state, into a power if there is power, if the voltage is a specified voltage value, the insurance tube has not been burned;
当数控弹簧机送线架处于有电状态,线架不转时,应检查送线架电机是否能运转,卸下皮带试电机,查看变频器有没报警,如果不是,就要及时更换变频器;
When the wire frame in a state has power CNC spring machine, wire frame does not turn, should check whether the motor wire feeding shelf operation, remove the belt motor test, check converter has no alarm, if not, it is necessary to replace the inverter in a timely manner;
当线架没有同步送线功能时,就是自动送线功能,检查线架电路板中的继电器是否烧坏,如果继电器的工作灯一直亮,就需要更换;
When the wire frame is not synchronous transmission line function, is the automatic wire feeding function, check the circuit board circuit of the relay is burned, if the relay work lights have been bright, you need to replace;
当微动开关的拉杆拉到底时,线架没有停止运转, 弹簧机的显示频上也没有出现“线架故障”之类的字样,如果有就要检查微动开关盒里的拉杆是否与两头的感应器相接触,如果没有,就要调整为接触,或者是更换感应器。
When the pull rod pull end micro switch, wire frame did not stop, spring machine display frequency did not appear "fault line" and so on, if there is to check whether the micro switch rod box with two sensors in contact, if not, it is necessary to adjust the contact, or replace the sensor.
关于电脑弹簧机 http://www.diannaothj.com就先介绍到这里了,相信大家在实际的工作中会用到相关知识,如果您有这方面的需要,欢迎前来选购。
Http://www.diannaothj.com on the computer spring machine is introduced here, I believe we will use the relevant knowledge in the actual work, if you have this need, welcome to come to buy.

上一篇:弹簧试验机精度高低的设定标准
下一篇:提高压簧弹簧质量方式有哪些?
联系我们