当前位置:首页 - 新闻动态 > 企业动态 >

弹簧机械设备调整的部位

来源: http://www.diannaothj.com    时间:2016-04-15 16:10:58 作者:山东银丰弹簧机设备

1.弹簧外经的调整:
1 spring external adjustment:
主要是来调整外经的机构,只需要调试顶杆往里或是往外,在调整方面比较简单。
Mainly to adjust the outside of the body, only need to adjust the top rod to the inside or outside, in the adjustment is relatively simple.
2.送料长度和总圈数的调整:
2 feeding length and the adjustment of the total number of cycles:
送料的长度是决定所选用齿轮的齿数,齿轮数多少的控制是需要看弹簧的展开长度。
The length of feed is determined by the number of gear teeth, the number of gear control is required to see the expansion of the spring length.
3.自由高度、节距和圈数的调整:
3 free height, pitch and ring number of adjustment:
弹簧长度调节,包括内推和外节距两种。内推需要调节里面推的直杆,来带动顶针将弹簧推开;外节距是由凸轮带动节距刀和顶杆弹簧,从而将弹簧给打开。
Spring length adjustment, including two kinds of internal and external. Push to adjust inside push straight rod, to the thimble is driven to push the spring; outside the pitch is by a cam driven section from the knife and push rod spring, which will spring to open.
4.支承圈间并紧力的调整:
4 the adjustment of the bearing ring and the tight force:
在卷制压缩弹簧的时候,需要两端的圈并紧,贴紧的长度有特定要求。
When the compression spring is rolled, the ring is needed at both ends and the length of the compression spring is tight.
5.切断机构的调整:
5 adjustment of cutting mechanism:
对于切断的机构,通常采用的是切刀,由垂直切断的方法来和芯心进行工作。可以使用加大芯轴的尺寸,允许同时起到支承簧圈的作用。
For cutting off the body, usually using a cutting knife, by the vertical cut method to work with the core. Can be used to increase the size of the core shaft, allowing the same time to play the role of supporting the spring ring.
本文由电脑弹簧机友情奉献.更多有关的知识请点击: http://www.diannaothj.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is contributed by computer spring machine friendship. More knowledge about please click: attitude of http://www.diannaothj.com most sincere. For you to provide the most comprehensive services. More relevant knowledge and we will continue to everyone dedication. Stay tuned.
上一篇:电脑弹簧机生产弹簧控制外径的方法
下一篇:压簧机的平衡问题的解决方法
联系我们