当前位置:首页 - 新闻动态 > 企业动态 >

数控弹簧机送线架故障的解决方式

来源: http://www.diannaothj.com    时间:2016-11-15 11:34:17 作者:山东银丰弹簧机设备

数控弹簧机开机时,送线架没工作灯显示,没鸣报时,检查送线架的开关是否处于闭合状态,进电源是否有电,电压是否是规定的电压值,保险管有没被烧毁; 当数控弹簧机送线架处于有电状态。
CNC spring machine boot, wire feeding shelf no lamp display, no sound time, check whether the wire frame switch is in the closed state, into a power if there is power, if the voltage is a specified voltage value, the insurance tube has not been burned; when the wire frame in a state has power CNC spring machine.
线架不转时,应检查送线架电机是否能运转,卸下皮带试电机,查看变频器有没报警,如果不是,就要及时更换变频器; 当线架没有同步送线功能时,就是自动送线功能,检查线架电路板中的继电器是否烧坏,如果继电器的工作灯一直亮,就需要更换。
Line frame does not turn, should check whether the motor wire feeding shelf operation, remove the belt motor test, check converter has no alarm, if not, it is necessary to replace the inverter in time; when the line does not have synchronized wire function, is the automatic wire feeding function, check the line frame relay circuit board is burnt out if the work, lamp relay has been lit, will need to be replaced.
数控弹簧机当微动开关的拉杆拉到底时,线架没有停止运转, 弹簧机的显示频上也没有出现“线架故障”之类的字样,如果有就要检查微动开关盒里的拉杆是否与两头的感应器相接触,如果没有,就要调整为接触,或者是更换感应器。
CNC spring machine micro switch when the pull rod pull end, wire frame did not stop, spring machine display frequency did not appear "fault line" and so on, if there is to check whether the micro switch rod box with two sensors in contact, if not, it is necessary to adjust the contact, or is the replacement of the sensor.
山东银丰弹簧机械设备制造有限公司 的电脑弹簧机提供技术支持,更多精彩内容请进入: http://www.diannaothj.com,我们会倾情为您解答。
Provide technical support of computer spring machine Shandong Yinfeng spring mechanical equipment manufacturing Co., for more details, please enter: http://www.diannaothj.com, we would love for you to answer.

上一篇:自动卷簧机的选购需要的关注
下一篇:电脑弹簧机的平衡系统介绍
联系我们